Squirt Chain Lube

This liquid lubricant has unique properties that make it ideal for
use in any cycling condition. It had been developed to give better
lubrication, last longer and keep the chain cleaner over extreme
distances for both MTB and road cycling. No degreasing is required.

Squirt is an emulsion that is blended under special controlled
conditions from a number of waxes. This process gives it a unique smooth
 texture that makes it very easy to apply. No separation will take place
 under normal storage conditions and no clogging of the nozzle will
occur.

Due to Squirt’s composition, build-up due to dirt does not occur and no grinding paste will form.

Continuous application can be done without having to clean the chain.
 Excess wax that gets expelled by the chain does not attract dirt,
hardens slightly and falls off during riding. Cleaning with a dry brush
is adequate. This lubricant also sticks to the chain longer and extends
lubrication intervals.

Squirt Physical properties:

• This lubricant is not flammable.
• It has an off white colour with a very mild odour.
• Store between 5°C and 35°C.
• Thermal decomposition will only take place at approx.100°C.
• On skin contact, remove with warm water and soap. (Not readily absorbed through the skin)

To get the full benefit of the Squirt Experience

• Do not apply over a greasy chain that has had other “wet” or “dry” lubes on it.
• Degrease first and allow chain to dry.
• Apply a drop of Squirt on each chain roller and don’t wipe any off.
• Wait 5 minutes and apply again. Don’t be alarmed if over zealous application results in lube to drip from the chain initially.

Now go ride, smile, use money saved on degreaser you no longer need to buy cake.