Ti29-Mk3

Available for pre order

The Mk3 Ti29er has evolved over the last 12 months - and the wait has been worth it!!  

It's still a 29er hardtail designed on a 100mm fork, and the long, low classic titanium frame is still there - but with a few notable improvements:-

• The chainstay/BB area has been stiffened by using a machined yoke.  This has 3 benefits - increased lateral stiffness, increased tyre/chainring clearance and shorter chainstays.
• The seat stays have been extended in front of the seat tube to increase lateral stiffness.
• the seat tube has a slight bend in it to allow the rear wheel to be closer to the cranks to liven up the back end even more.
• the rear hub dropout spacing is boost 12x148mm to improve rear end stiffness and increase the chainring/tyre clearance bu using a 3mm wider chainline.
• the BB is slightly lower to improve handling, but not so low as to pedal strike too easily!
• Dropper ready - the Seat tube is now 35mm diameter on all frames to allow 31.6mm internal dropper compatibility, 
• Single chainring only for 1x drivetrain compatibility!
• Logos are now etched on the down tube and the head tube - stealthy!
• 17" 19" and 21" frames available

Geometry

 Geometry is based on a 100mm fork with axle to crown fork length 506mm un-sagged (no rider)